CasEdge Diabolic Series Limited Edition Gamer Case

Company: CasEdge
Product: Limited Edition Diabolic Series Gamer Case
Street Price: ~$149 USD
Date Reviewed: December 31, 2003
Reviewed By: Jason Rabel

Hardware Installation:

The top drive bays are very unique and simple to use. Only one rail is required to mount a drive, which is shown in the second picture. The drive just slides in and snaps into place, with the tabs holding it firmly. In my opinion, using drives with black face-plates would probably look best, unless you have the time and resources to match up the color and paint your drives.

The motherboard tray slides out with ease, and also requires no screws to mount the motherboard. While the pins on the tray are permanently fixed, it should be compatible with 99%+ of the motherboards available today. Once the motherboard is mounted, simply slide the tray back into place in the case.

If by chance a motherboard doesn't fit the tray, fear not! There are regular holes in the case that for installation of traditional standoffs, however they are not included (but easily available at stores).

Here is the one and only part of the installation that requires using a screwdriver. The hard drive cage has little grooves in it, which the special screws slide into. There is also a nifty handle which mounts to the hard drive allowing easy installation and remove of the drive. The handle also doubles as a hold-down for the cables.