SilverStone Special Wind Tunnel Design Temjin 6 SST-TJ06 Full Tower Case

A first look at the SilverStone SST-TJ06:

As mentioned before the SST-TJ06 case features a nice aluminum front panel (as opposed to most cases which are only plastic), and the body is crafted from 0.8mm steel. The front panel is very clean and simple, with metal power & reset buttons, and power & hard drive LEDs. Behind the front panel are two intake fans, one 120mm and one 80mm. When looking at the back of the case, it is obvious that something isn't right when the I/O shield and PCI slots are reversed. Also there is a large 120mm exhaust fan at the very bottom of the case.

Here's a close-up of the front panel to show off the quality craftsmanship. To remove the block-out plates there is a lock on the side of the case, once unlocked the front panel swings open. Once it is open there is easy access to unscrew the front plates as needed, and to add in any CD/DVD/Floppy drives.

To keep the front panel looking clean and sharp, the front USB, Firewire, and audio ports have been moved to the side. The cables inside for these ports are plenty long, and shouldn't have any trouble connecting to the proper motherboard headers. This case also has four swing-out feet to give extra stability, a must for any full tower case.

Included with the case are all the drive rails and accessories necessary to mount your PC components. An instruction manual takes the installation process step-by-step with pictures, which for this case is definitely needed because of how everything mounts in an untraditional style.