Mushkin HP2-6400 2GB (2x1GB) DDR2 Dual Pack

Test Setup & Benchmarks Used:

For our testing procedure, we used MemTest86+ to check for stability, Sandra XII 2008, Everest v4.00, and PCMark05 for our benchmarks. Also if we say "stable", it means that the memory was stable through many loops of MemTest86+. If the memory could not run through MemTest86+ without giving errors, we did not even bother to boot into windows and run the benchmarks. Benchmark results were averaged over five trial runs.

When testing memory, there are a million different ways one can test it, timings, voltages, FSB, all play an important role. For review purposes we try to focus on the overall performance of the memory, as each module will perform different on various setups. We test the memory in 5MHz increments since each module will vary some on its maximum overclock.